|
 |
We offer boxes in
either 9 Ply Baltic Birch or Solid Hardwood. The joints are half
blind dovetails that are only visible from the sides of the box.
The bottom is let-in, dadoed and glued ½” up from the bottom
edge of the frame. The ply-wood boxes come standard with the
tops of the front and backs flush with the sides. Solid boxes
come standard with a rounded top having the front and back
standing proud 3/32.” Height sizes can only be ordered on the
whole or half inch (4” or 4 1/2”). Due to dovetail placement,
drawer boxes ordered on the whole inch will be 3/32” larger (4
3/32”) and drawer boxes ordered on the half inch will be 3/32”
shorter (4 13/32”). Boxes are priced based on perimeter using a
variable height price scale and a variable per box piece charge.
Option prices are per box unless otherwise noted and they are in
addition to the drawer box cost. Solid wood boxes come standard
with 5/8” material, 1/2” upon request.
Ordering is done WIDTH
X HEIGHT X DEPTH
The Minimum: 3"
X 2" X 8"
The Maximum: 58"
X 22" X 58" |
|
|
PLYWOOD MATERIAL
CHOICES
|
9 PLY DRAWER BOX
MATERIAL CHOICES |
BOTTOM
CHOICES |
UNFINISHED FLAT TOP (eased edges)
UNFINISHED BULLNOSE TOP
PRE-FINISHED WOOD GRAIN FOIL FLAT TOP
PRE-FINISHED CLEAR FOIL BULLNOSE TOP |
UNFINISHED BALTIC BIRCH (matches unfinished Flat
Top)
PRE-FINISHED NATURAL MAPLE (matches pre-finished
drawer sides)
MELAMINE
CORRESPONDING HARDWOOD (natural grade, underside
may not be same species as front). |
|
|
|
SOLID WOOD MATERIAL SELECTION
All solid wood drawer boxes will have a bullnose top edge
unless otherwise specified. All materials in the hardwood
category are priced as natural grades, please call for
quotes on upgrades or materials not listed. |
| |
|
DRAWER OPTIONS |
|
LASER LOGO ENGRAVING: Standard placement for logo engraving
is on the inside front left of the drawer box. Logo artwork can
be submitted via a scanned image, electronic format submission
is preferred. The following electronic formats are preferred:
Illustrator, Corel, Photoshop, MS Word, .jpg, .png, or .gif
format. Please attach the logo to an email and submit it along
with your Customer # and name to: order@dreeswoodproducts.com |
 |
|
| HARDWARE PREPARATION: We are prepared to accommodate most
brands of hardware. Contact order desk for with your hardware
needs. |
|
#1801 |
#1901 |
|
Salice |
Salice- 6 Way |
|
|
NOTCHING
Standard notching and drilling can be done for
Blum™ #562 and
#563 under mount drawer slides. |
 |
|
Dinopro |
LOCKING CLIPS
Blum™
#1801 or #1901 locking clips can be supplied and
installed. |
|
| |
|
| |
|
|
|
|
DRAWER WITHIN A
DRAWER
(hardware and assembly included): Space
saving design. Individual box pricing applies.
Minimum outer box 10w” x 6h” x13d”
Minimum inside box
Height 2 1/2” |
 |
|
|
|
|
 |
SPICE RACK
(9 ply only, up to 12”
Wide): Spice racks are available with a fixed top and
bottom tray. Adjustable center trays are available based on
application. Call for quote on custom specifications. |
| |
|
DIVIDERS
Internal section dividers are
available in the same material selected as the drawer box.
The dividers are dadoed into the sides, front, & back.
Dividers are removable and are standard 1/2” thick. |
 |
| |
|
|
 |
SCOOP PULLS
There are two scoop options (A & B) that
are available on both solid and plywood fronts. The minimum
height is 2 1/2”.
Note: 9-Ply flat wood grain foil drawer box scoops will have
a faux
finished scoop. |
| |
|
|
CUSTOM DRAWER
CUTOUT
Call for quotes.
|
 |
| |
|
|
 |
TRASH CAN
Trash can
boxes are available for side or undermount hardware. Refer to
table for minimum sizes. Units are provided with 35 quart trash
can(s).
| |
|
W x H x
D |
|
Sidemount |
Single |
12” x 10”
x 16” |
| |
Double |
16” x 10”
x 22” |
| |
|
|
|
Undermount Blum |
Single |
13” x 10”
x 18” |
| |
Double |
17” x 10”
x 24” |
|
| |
|
TRASH PULLOUT
17" Front Height
10" Back Height
|
 |
|
 |
SLOPED SIDES
Sloped sides are available with any
rise on the side provided that the minimum and maximum
standard drawerbox limitations are not exceeded. Solid
fronts are a compatible option. Custom sides are available,
contact customer service department for quote. |
| |
|
|
LAZY SUSAN DRAWERS
Options for Lazy Susan Drawers
include a
square back (normal) and an angled (shown). Notch end
clip order is also available.
Maximum
height is 12”. |
 |
| |
|
 |
HANGING FILES
Standard
file hangers have rails that are parallel with the sides of
the drawer box. Lateral file hangers have rails that are
parallel with the front and back of the drawer box.
Standard Letter Min: W 14” – Min: H 10 1/2”
Standard Legal Min: W 17” – Min: H 10 1/2”
Lateral Letter Min: D 14” – Min: H 10 1/2”
Lateral Legal Min: D 17”
– Min: H 10 1/2”
|
| |
|
|
RADIUS BOXES
Concave or Convex drawer boxes are
available.
Contact our customer service department for quotes. |
 |
| |
|
|
 |
SPICE DRAWERS
Slats are 5" and can be removed.
Available in
solid wood and finish. |
|
|
|
|
|
SOLID WOOD INTEGRAL FRONTS
Solid wood fronts may be added to plywood boxes for pantry
pull-outs and other applications. Thickness may either be
1/2”, 5/8”, or 3/4” upon request. All advertised species are
available.
LIP FRONTS: Lip fronts are available on drawer boxes
with solid fronts only. Lips are designed to hide side and
under mount drawer slides. |
 |
| |
|
|
UNDER MOUNT LIP FRONTS: Lips are designed to
hide under mount drawer slides. |
| |
|
|
 |
| |
|
|
|
|
|
CEDAR
DRAWER BOX
|
 |
|
|
|
|
 |
Angled Sloped Side
These Dovetail drawer boxes with
straight angled side rails work well for pull-out storage in base
cabinets and pantries. They are available with or without front scoop.
|
|
|
|
|
Half-Angled
Sloped Side
Dovetail drawer box with
half-angled side rails are great for pull-out storage in base
cabinets and pantries. These boxes are available with or without front
scoop.
|
 |
|
|
|
|
 |
Scalloped Sloped
Side
These elegant Dovetail drawer boxes
with scalloped side rails are super for pull-out storage in base
cabinets and pantries. They are also available with or without front
scoop. |
| |
| |
|